Bradford White

For more detailed information on Bradford White - Hot Water Heaters, please visit http://www.bradfordwhite.com.

Defender Safety System® Energy Saver Models and Non-Defender Models

Atmospherically vented Defender Safety System® water heaters provide class-leading performance and the safety of ScreenLok® Technology. This Flammable Vapor Ignition Resistant (FVIR) system offers peace-of-mind to you and your customers. Defender Safety System® water heaters are available in 30, 40 and 50 gallon gas-powered models and are built with superior features that will provide all the comforts of hot water safely and efficiently for many years of maintenance-free service. 75 and 100 gallon models do not include Defender Safety System®.

Defender Safety System® features:

Advanced ScreenLok® Technology
Flame Arrestor design
Resettable thermal switch
Piezo ingiter
Maintenance free
Pedestal base
Sight window
Standard Energy Saver features:

Fully automatic controls
Factory installed Hydrojet® Total Performance System
Vitraglas® lining
Factory installed dielectric waterway fittings
Flue baffle
Protective magnesium anode rod
"Snap-Lock" draft diverter
T&P relief valve included
Brass drain valve
1" Non-CFC foam insulation (except where noted)

CombiCor®

The CombiCor® system is a single, economical alternative to installing a heating system and a water heater. The CombiCor system provides heat for the home as well as potable hot water. When coupled with a radiant panel system, it creates perfect home comfort with heating loads as low as 10 BTUs per square foot.

Available in 47 and 73 gallon capacities (for both Natural and LP Gas)
Exclusive Ultracoil® heat transfer system
Factory Installed Hydrojet® Total Performance System
Oil Fired models available in 49 and 69 gallon capacities
TTW®1 and TTW®2 models available

TTW®1 and TTW®2

The TTW® (Through-The-Wall) series water heaters make it easy to install a gas water heater in homes without chimneys. TTW® series water heaters are power-vented for positive exhaust and can be vented exceptional distances horizontally and vertically giving you the flexibility you need to place one in almost any part of a home.

Defender Safety System features:

Advanced ScreenLok® Technology
Flame Arrestor design
Flammable vapor sensor
Maintenance free
LED display for diagnostics and start up
Standard features (TTW®1):

Factory Installed Hydrojet
Total Performance System
Vitraglas® lining
Powerful blower motor
Spark-to-Pilot ignition system
Horizontal venting
Vertical venting
Factory installed heat traps
Steel tank
Electronic gas control valve
Flue baffle
Protective magnesium rod
Factory installed T&P valve
Brass drain valve
Factory installed dielectric waterway fittings
Pedestal base
Sight window
1'' Non-CFC foam insulation
Standard features (TTW®2):

Everhot Tankless water heaters have the ability to supply a continuous amount of hot water reliably and efficiently. These units also eliminate stand-by heat loss for optimal energy savings and easily mount on the wall both indoors and outdoors for saving premium floor space. Will be available in two residential and two commercial models with an indoor and outdoor version.

Nine pass heat exchanger
Remote control
Direct electronic ignition
Diagnostic controls
Lime accumulation sensor
Fully automatic controls
Continous flow
Very low noise level
Cut energy waste
Interior and exterior models
Space saving installation
Ten year limited warranty
on heat exchanger
Five year limited warranty on parts

65 Gallon Gas

The 65 gallon water heater is the solution when a 50 gallon model is too small and a 75 gallon is more than you need. The "65" is perfect for today's modern homes. It can meet the demands of a large master bathroom tub in addition to fulfilling a household's regular hot water needs.

65,000 BTUs
126 gallon First Hour Delivery- Highest in class (as good as most competitors 75 gallon models)
Side connection's for space heating

XR - Extra Recovery

The Bradford White Extra Recovery models are perfect for homes that have higher peak demands for hot water. The Extra Recovery models have higher inputs for faster recovery to keep up with the need for higher volumes of hot water. They also feature side connections making this unit versatile enough to handle both potable and space heating requirements.

Defender Safety System features:

Advanced ScreenLok® Technology
Flame Arrestor design
Resettable thermal switch
Piezo ingiter
Maintenance free
Pedestal base
Sight window
Standard Energy Saver features

Fully automatic controls
Factory Installed Hydrojet®
Total Performance System
Vitraglas® Lining
Factory installed dielectric waterway fittings
Flue Baffle
Protective magnesium anode rod
Side tappings
"Snap-lock" draft diverter
T & P Relief Valve included
Brass drain valve
2" Non-CFC foam insulation
(1" on M1 models)

High Input Direct Vent Energy Saver

Tight spaces, such as utility closets, are not a problem for the DS1 or DH1 direct vent water heaters, because it requires no inside air for combustion. A telescopic vent pipe and the exceptional ability to vent up to 8ft (with an optional vent kit) provide great versatility for placement of this direct vent water heater.

Fully automatic controls
Factory installed dielectric waterway fittings
Co-axial rotational venting
Side tappings for space heating
Optional vent kit allows up to 8' horizontal or vertical venting extensions
Factory Installed Hydrojet®
Total Performance System
Vitraglas® lining
No electrical power necessary
Protective magnesium anode rod
Piezo igniter
Factory Installed T&P valve
Brass drain valve
1" Non-CFC foam insulation

M2 Electric

Our M2 line features the power of the Hydrojet® Total Performance System with the convenience of electricity. Available in single and double element models, the M2 electric water heaters give you the power you need to heat hot water with electricity.

Available in 30, 40, 50, 65 and 80 gallon capacities

Temperature and pressure relief valve opening
on top of tank

Also available, M1 lowboy models with insulating blanket for tight replacement installations.

Power Direct Vent

The Power Direct Vent provides the flexibility to locate a gas-fired water heater in areas lacking sufficient combustion air and where there is no immediate access to an outside wall or chimney. The unit’s combustion air is drawn in through one pipe and the products of combustion are exhausted through a second pipe.

Factory Installed Hydrojet®
Total Performance System
Vitraglas® lining
Factory installed dielectric waterway fittings
Side connections for space heating
NSF construction available
Factory installed T&P valve
Brass drain valve
6 year limited tank warranty
1 1/8" Non-CFC foam insulation

PowerStor Series®

The Bradford White PowerStor Series® indirect water heater has a newly designed, super-efficient heat exchanger that is the heart of the PowerStor. The coil’s 1.5 inch diameter carbon-steel tubing is Vitraglas® coated. A total heat surface area of 14.2 feet for residential models contributes to the PowerStor’s exceptional first-hour delivery and vast hot water reserve.

Stainless Steel Tank and Heat Exchanger
1" NPT supply and return connections
Corrosion and dent resistant jacket
Brass drain valve
T&P relief valve opening
CFC free polystyrene insulation
Aquastat

High Efficiency Electric

The High Efficiency electric water heater offers exceptional energy efficiency and low operating cost. Customers will appreciate the long-term savings they get from this efficient model.

Fully automatic controls
Direct heat transfer with immersion elements
Factory installed Hydrojet® Total Performance System
Heat traps
Vitraglas® lining
Factory installed dielectric waterway fittings
Protective magnesium anode rod
T&P relief valve opening
Brass Drain Valve
2" Non-CFC foam insulation

Oil-Powered - Aero® Series

Bradford White’s Oil-Fired water heaters are available in center and rear flue models. Each gives you the unsurpassed performance you expect from an oil-fired water heater. The Aero Series comes with a flexible stainless steel baffle on center flue models and a ceramic fiber combustion chamber that concentrates the flame for a hotter fire and maximum heat transfer. Designed for quick and easy installation.

High recovery rates
Lowest operating costs
Flexible stainless steel baffle (Center Flue models only)
Factory installed Hydrojet® Total Performance System (Center Flue models only)
Vitraglas® lined tank
Ceramic fiber combustion chamber
Protective magnesium anode rods
T&P relief valve included
Brass drain valve
Fiberglass insulation

Our Products

Bradford White